single component polyurea

SWD952 Series SH110 One component hand brushable polyurea power plant desalination water tank special anticorrosion coating Applied With unique formula and goes through scientific process, the coating cured by absorption and reaction with air moisture, with high adhesive strength on the substrate. Except large amount of urea bond, biuret bond, coating has urethane bond and hydrogen bond, which greatly enhanced its mechanical performance and anticorrosion performance. Compared with two components polyurea coating, one component polyurea power plant desalination tank anticorrosion coating has higher performances of acid resistance, alkali resistance, salt resistance, water and wet resistance, temperature variation and chemical resistance. One component product is easy to use, can brush, roller and spray without special polyurea spray equipment. Color Multiple colors as customers’ need Luster glazed Density 1.05g/cm3 Volume solid content 82%±2% VOC ≤173g/L Recommended dry film thickness 250-350μm Theoretical coverage 0.26kg/sqm (calculated by the above solids percentage and dry film thickness of 200 microns) Practical coverage Allow appropriate loss rate Dry time 1-3h Overcoating interval min: 3h, max: 32h Overcoating method Airless spray, Air spray, Brush, Roller Flash point 56℃
power plant desalination tank, various types of industrial soft water treatment system