Especially suitable for the molding

for plaster decoration duplication,
for gypsum sculpture reproduction,
for duplicating resin product with fine details,
for PU resin reproduction,
for wax molding,
for stone duplication ,
for epoxy moulds,
for pacrylic moulding,
for reproducing polyester craft

Some of the materials you can cast into a silicone mold are: 
• Urethane Plastic
• Urethane Rubber
• Epoxy
• Polyester 
• Fiberglass Resign 
• Plaster
• Soap
• Wax
• Low melt metals (up to 400 degrees Max)
• HydroCal White
• UltraCal 30
• Rigid Foam

• concrete statue mold

/Good fluidity and good operability and good for pouring method.
/Excellent mechanical properties, in particular tear strength and tensile strength.
/Excellent flexibility and it is easy to demould.
/High temperature resistance, high duplication times and repeated use.
/There are a range of catalysts/curing agent/hardener allows the Liquid rtv silicone rubber  to fulfill requirements for various applications and various requirements on the operation time and curing time.

1.The cast pouring, for example:
Prepare a frame, fix the prototype for copy into the frame, (if the prototype’s material is glass or ceramic, the release agent is necessary to prevent sticking.
2. Take 1 part A and 1 part B,mix themevenly.
3.Vacuum defoaming in 1~3 min,inject the rubber into the type box, then vacuum defoaming again, curing 24 hours in nature room temperature, use it after demold.
4. Demold after 3 hours’ room temperature curing, and then use it after 24 hours’ keep mold under the same condition.

Packing:5kg/pail,25kg/pail,200kg/pail
Delivery time is within 3 days after getting your bank receipt.
Payment Terms: T/T 100% in advance,L/C,Western Union
Mind order quantity(MOQ):200KG

Transport: by sea or by air

Shelf life:12 months under room temperature not open