Ground coat stove glaze coat black vitreous enamel frit EGC-112
1.58
Ground coat for stove glaze coat black vitreous enamel frit EGC-112
Nolifrit Ground Coat Porcelain Enamel Frit Features:
1, With very good adhesion, can dissolve much iron oxide in metal surface, makes very strong combination with metal body.
2, Can be combined with cover coat in high level.
3, With very good elasticity and compressive strength. Prevent and decrease damage due to mechanical stress.
4, With less viscosity and surface tension, it’s good for escape of gas when firing. Reduce bubbles on cover coat. To ensure the smooth surface of enamel products.
5, With suitable expansion coefficient similar as steel plate.
Steel Plate Ground Coat Porcelain Enamel Frit Usage Introduction:
Steel plate ground coat frit is mainly used in low carbon steel plate, with very good adhesion and wide firing temperature range. It can be single used, and can be also mixed with other ground coat frits according to firing temperature required.
Milling Ratio of Co-Ni ground coat porcelain enamel frit:
| Enamel frit | 100 |
| Quartz powder | 0-8 |
| Sodium Nitrite | 0.2-0.3 |
| Clay | 5-7 |
| Borax | 0.3-0.5 |
| Water | 50-55 |
| Enamel Slurry Fineness | 150mesh(0.5-1.0g residues/100ml) |
| Specific Gravity | 160-170g/100ml |
You Must Be Troubled by Enamel Coating Problems!
For Better Enamel Coating, Nolifrit Can Help You!
Professional BBQ Manufacturer in North America Mr. Jacky .Carl
We bought from Ferro(USA) before, and we started to try Nolifrit 10 years ago, then I never going to change supplier again. Nolifrit enamel frit quality stable , and their technical support without any delay. The most important is that they help us to save more than 20% enamel raw material cost, which makes us more competitive in the market.
The Most Famous Cast Iron Enamel Cookware Manufacturer in Europe Ms. Rose . Diane
We used pigments from Ferro and Pemco before, 3 years ago we placed a trial order from Nolifrit for Cadmium red pigment. We tested their Cadmium red pigment and see it has very strong coloring power. With price lower about 40%, it can fully replace the former supplier’s pigment. Now we are thinking about to expand the business cooperation with Nolifrit, not only for their pigments but also their cast iron enamel frits.
Nolifrit Steel Plate Ground Coat Frit List:
| Product Name | Product Code | Expansion Coefficient(*10-7) | Firing Temperature(℃) | ||||||||
| High Temp Ni Frit | EGC-103 | 286.5 | 860-890 | ||||||||
| Mid Temp Ni Frit | EGC-118 | 309.1 | 800-840 | ||||||||
| High Temp Sb-Mo Frit | EGC-105 | 297.1 | 840-870 | ||||||||
| Mid Temp Sb-Mo Frit | EGC-114 | 301.4 | 820-860 | ||||||||
| Low Temp Sb-Mo Frit | EGC-124 | 290.1 | 780-820 | ||||||||
| High Temp Co-Ni Frit | 2405 | 288.1 | 860-880 | ||||||||
| Mid Temp Co-Ni Frit | 2401 | 292.1 | 820-860 | ||||||||
| Low Temp Co-Ni Frit | 2400 | 300.5 | 780-820 | ||||||||
| Industry Category | Chemicals/Other-Chemicals |
|---|---|
| Product Category | |
| Brand: | Nolifrit |
| Spec: | EGC-112 |
| Stock: | |
| Origin: |