Wiring Instructions:

1. VCC : Connect 12-30V power supply ( Refer to the working voltage of the motor, general 24V )

2. GND: Ground wire

3. CLK : Control signal (Connected to pulse input )

4. DIR: Direction control signal ( Floating forward, ground reverse )

5. ENA: Connect to enable signal ( Default enable, grounding stops working )

6. P2: Connect one phase to the motor on each side ( Refer to the motor parameter description,   the motor is divided into two phases AB, pins 1 and 2 are connected to one phase, and pins 3 and 4 are connected to the other phase. )

 

Products Details

The use of high-quality raw materials and high-standard permanent magnet silicon steel, with 1000-line high-precision encoder, completely overcome the open-loop stepper motor stepping problems.

https://sequremall.com/collections/stepper-motor-driver/products/small-stepper-motor-driver-online